CREATE a CV. (Example. PRE_DUL_REPLACE).

There are many ways to create a CV locally without connecting to the OSS but only the two methods mentioned below will be discussed. NOTE: A cv name cannot contain any spaces, if a space is required you MUST use an underscore.

Utilizing the Command Line(CLI) Method:

1. Open HyperTerminal, Putty or other terminal emulation program.
2. Set Bit Rate = 9600, 8 data bits, no parity, 1 stop bit, no flow control.
3. Username = rbs Password = rbs.
4. Type : cv mk PRE_DUL_REPLACE.
5. Hit Enter, when result says ok, your CV should be created.
6. Type : cv set PRE_DUL_REPLACE.
7. Hit Enter, when result says ok, your CV is now set as Startable.